“Need to start a transaction before commit” Fault Exception in crm 2011


Hi we were getting this error on our plugin on post update of an entity.

The plugin was using Associate message to associate one entity record to other.

If the records were already associated, it was throwing “duplicate key” error, so we were catching that fault exception and then were updating few other records in our plugin. However just after the execution of our plugin, we were getting the CRM’s Error dialog box having a error log file mentioning the above error.

Later we realized that once a Fault Exception is thrown then the execution of the plugin is no longer in transaction. We can’t catch the faualt exception and still be in transaction. This post clarified that.

http://social.microsoft.com/Forums/en-US/crmdevelopment/thread/ca1301ca-cef9-4940-9cb4-e968641199f6

Hope it helps !

Enabling button in SubGrid on selection of record (SelectionCountRule) in CRM 2011


 

We had a requirement to have a custom button on a subgrid for an entity, and the button should only be enabled if and only if one record is selected.

It should get disabled in case if no records are selected or more than one record selected.

Used the below ribbondiffxml to achieve that

   <RibbonDiffXml>
        <CustomActions>
          <CustomAction Id="MyOrg.CustomAction" Location="Mscrm.SubGrid.entitySchemaName.MainTab.Management.Controls._children" Sequence="50">
            <CommandUIDefinition>
              <Button Id="MyOrg.Button" ToolTipTitle="Upload Required Document" ToolTipDescription="Upload Required Documents for the Case" Command="MyOrg.Command" Sequence="50" LabelText="Upload Document" Alt="Upload Document To Portal" Image16by16="/_imgs/ribbon/AddEmail_16.png" Image32by32="/_imgs/ribbon/Email_32.png" TemplateAlias="o1" />
            </CommandUIDefinition>
          </CustomAction>
        </CustomActions>
        <Templates>
          <RibbonTemplates Id="Mscrm.Templates"></RibbonTemplates>
        </Templates>
        <CommandDefinitions>
          <CommandDefinition Id="MyOrg.Command">
            <EnableRules>
              <EnableRule Id="MyOrg.EnableRule"></EnableRule>
            </EnableRules>
             <DisplayRules />
            <Actions>
              <JavaScriptFunction Library="$webresource:new_test" FunctionName="showvalue">
                <StringParameter Value="Guid(s) Selected"></StringParameter>
                <CrmParameter Value="SelectedControlSelectedItemIds"></CrmParameter>
              </JavaScriptFunction>
            </Actions>
          </CommandDefinition>
        </CommandDefinitions>
        <RuleDefinitions>
          <TabDisplayRules />
          <DisplayRules />
          <EnableRules>
            <EnableRule Id="MyOrg.EnableRule">
              <SelectionCountRule AppliesTo="SelectedEntity" Maximum="1" Minimum="1"></SelectionCountRule>
            </EnableRule>
          </EnableRules>
        </RuleDefinitions>
        <LocLabels />
      </RibbonDiffXml>
	  

Hope it helps

 

Sample Code for adding a button for SubGrid and passing id of the selected records (CRM 2011)


Simply replace the entity schema name with your entity

  <RibbonDiffXml>
        <CustomActions>
          <CustomAction Id="MyOrg.CustomAction" Location="Mscrm.SubGrid.entitySchemaName.MainTab.Management.Controls._children" Sequence="50">
            <CommandUIDefinition>
              <Button Id="MyOrg.Button" ToolTipTitle="Upload Required Document" ToolTipDescription="Upload Required Documents for the Case" Command="MyOrg.Command" Sequence="50" LabelText="Upload Document" Alt="Upload Document To Portal" Image16by16="/_imgs/ribbon/AddEmail_16.png" Image32by32="/_imgs/ribbon/Email_32.png" TemplateAlias="o1" />
            </CommandUIDefinition>
          </CustomAction>
        </CustomActions>
        <Templates>
          <RibbonTemplates Id="Mscrm.Templates"></RibbonTemplates>
        </Templates>
        <CommandDefinitions>
          <CommandDefinition Id="MyOrg.Command">
            <EnableRules />
            <DisplayRules />
            <Actions>
              <JavaScriptFunction Library="$webresource:new_test" FunctionName="showvalue">
                <StringParameter Value="Guid(s) Selected" > </StringParameter>
                <CrmParameter Value="SelectedControlSelectedItemIds"></CrmParameter>
              </JavaScriptFunction>
            </Actions>
          </CommandDefinition>
        </CommandDefinitions>
        <RuleDefinitions>
          <TabDisplayRules>
          </TabDisplayRules>
          <DisplayRules />
          <EnableRules />
        </RuleDefinitions>
        <LocLabels />
      </RibbonDiffXml>

Function for the jscript web resource.

function showvalue(){

alert(value);

}

Hope it helps.

Sample code for adding a custom button on a custom tab for SubGrid of an entity in ribbon (CRM 2011)


Just replace the schema name of your entity.

 <RibbonDiffXml>
        <CustomActions>
          <CustomAction Id="Sample.SubGrid.entitySchemaName.CustomTab.CustomAction" Location="Mscrm.SubGrid.entitySchemaName.ContextualTabs._children" Sequence="40">
            <CommandUIDefinition>
              <Tab Id="Sample.SubGrid.entitySchemaName.CustomTab" Command="Sample.SubGrid.entitySchemaName.CustomTab" Title="Custom Tab" Description="Custom Tab Description" Sequence="500">
                <Scaling Id="Sample.SubGrid.entitySchemaName.CustomTab.Scaling">
                  <MaxSize Id="Sample.SubGrid.entitySchemaName.CustomTab.FirstGroup.MaxSize" GroupId="Sample.SubGrid.entitySchemaName.CustomTab.FirstGroup" Sequence="10" Size="LargeMedium" />
                </Scaling>
                <Groups Id="Sample.SubGrid.entitySchemaName.CustomTab.Groups">
                  <Group Id="Sample.SubGrid.entitySchemaName.CustomTab.FirstGroup" Command="Sample.SubGrid.entitySchemaName.FirstGroup" Sequence="10" Title="Custom First Group" Template="Mscrm.Templates.3.3">
                    <Controls Id="Sample.SubGrid.entitySchemaName.CustomTab.FirstGroup.Controls">
                      <Button Id="Sample.SubGrid.entitySchemaName.CustomTab.FirstGroup.FirstButton" ToolTipTitle="ButtonToolTipTitle" ToolTipDescription="ToolTipDescription" Command="Sample.SubGrid.entitySchemaName.FirstButton" Sequence="10" LabelText="LabelText" Alt="LabelText" Image16by16="/_imgs/ribbon/AddEmail_16.png" Image32by32="/_imgs/ribbon/Email_32.png" TemplateAlias="o1" />
                    </Controls>
                  </Group>
                </Groups>
              </Tab>
            </CommandUIDefinition>
          </CustomAction>
        </CustomActions>
        <Templates>
          <RibbonTemplates Id="Mscrm.Templates"></RibbonTemplates>
        </Templates>
        <CommandDefinitions>
          <CommandDefinition Id="Sample.SubGrid.entitySchemaName.FirstGroup">
            <EnableRules>
              <EnableRule Id="Mscrm.Enabled " />
            </EnableRules>
            <DisplayRules>
            </DisplayRules>
            <Actions />
          </CommandDefinition>
          <CommandDefinition Id="Sample.SubGrid.entitySchemaName.CustomTab">
            <EnableRules>
              <EnableRule Id="Mscrm.Enabled " />
            </EnableRules>
            <DisplayRules>
            </DisplayRules>
            <Actions />
          </CommandDefinition>
          <CommandDefinition Id="Sample.SubGrid.entitySchemaName.FirstButton">
            <EnableRules />
            <DisplayRules />
            <Actions>
              <JavaScriptFunction Library="$webresource:new_test" FunctionName="showvalue">
                <StringParameter Value="Guid(s) Selected" > </StringParameter>
                <CrmParameter Value="SelectedControlSelectedItemIds"></CrmParameter>
              </JavaScriptFunction>
            </Actions>
          </CommandDefinition>
        </CommandDefinitions>
        <RuleDefinitions>
          <TabDisplayRules>
            <TabDisplayRule TabCommand="Sample.SubGrid.entitySchemaName.CustomTab">
              <EntityRule EntityName="entitySchemaName" Context="SubGridStandard" />
              <EntityRule EntityName="entitySchemaName" Context="SubGridAssociated" />
            </TabDisplayRule>
            <TabDisplayRule TabCommand="Sample.Form.entitySchemaName.CustomTab">
              <EntityRule EntityName="entitySchemaName" Context="Form" AppliesTo="PrimaryEntity" />
            </TabDisplayRule>
            <TabDisplayRule TabCommand="Sample.Grid.entitySchemaName.CustomTab">
              <EntityRule EntityName="entitySchemaName" Context="HomePageGrid" />
            </TabDisplayRule>
          </TabDisplayRules>
          <DisplayRules />
          <EnableRules />
        </RuleDefinitions>
        <LocLabels />
      </RibbonDiffXml>

This is the helpful post

http://dynamicscrm2011.wordpress.com/tag/adding-a-button-to-the-crm-2011-sub-grid-ribbon/

Hope it helps !

Working with SharePointDocumentLocation in CRM 2011.


We had a requirement to associate a SharePointDocumentLocation with a case record when it is created. We wanted to use our own folder structure for it. Something similar to this

Sharepointdocumentlibraryurl/[CustomerName]/[CaseNumber]

i.e. folder name with Customer Name and a subfolder with the name of Case Number.

Normally SharePoint document location is created when we click on Documents on the left navigation pane for the record. It doesn’t get created or auto associated to a SharePoint folder on create of record.

So the solution was to write a plugin in on create event and then create a folder in SharePoint and then associate it with the created record.

The source code for implementing it (just posting the source code i hope it is self explanatory 🙂 )


// following logic within the Post Create plugin of Case (incident)
	 if (this.Context.MessageName.ToUpper() == "CREATE" && Context.InputParameters.Contains("Target")
                && Context.InputParameters["Target"] is Entity)
            {
                Entity targetIncident = (Entity)Context.InputParameters["Target"];

                //// Create doc folder for case
                Guid incidentId = Context.PrimaryEntityId;
                string ticketNumber = targetIncident["ticketnumber"].ToString();
                Guid customerId = ((EntityReference)targetIncident["customerid"]).Id;

                Contact contact = // code to get the contact's fullname

                SharePointHelper sharepoint = new SharePointHelper();
                sharepoint.CreateFolderForCase(organizationService, contact.FullName, ticketNumber, incidentId);
            }

// Helper functions used

	    public string CreateFolderForCase(OrganizationService coreCrmService, string contacFolderName, string caseFolderName, Guid incidentId)
        {
            string docLibraryUrl = "http://SharePointSiteCollection/incident";
            string applicantFolderUrl = docLibraryUrl + "/" + applicantFolderName;
            string caseUrl = applicantFolderUrl + "/" + caseFolderName;

            //// Create folder and subfolder inside SharePoint site
            this.CreateFolderStructure(applicantFolderUrl, caseUrl);

            //// create and associate the url of the folder to SharePointDocumentLocation and the incident record.
            this.CreateAndAssociateSharePointDocumentLocation(coreCrmService, incidentId, caseFolderName, caseUrl);
            return caseUrl;
        }

		private bool CreateFolderStructure(string applicantFolderUrl, string caseFolderUrl)
        {
            if (this.CreateFolder(applicantFolderUrl))
            {
                return this.CreateFolder(caseFolderUrl);
            }

            return false;
        }

		private bool CreateFolder(string folderUrl)
        {
            try
            {
                WebRequest request = WebRequest.Create(folderUrl);
                request.Credentials = this.credentials;
                request.Method = "MKCOL";
                WebResponse response = request.GetResponse();
                response.Close();
            }
            catch(Exception ex)
            {
                TraceHelper.TraceEvent(ex, "CreateFolder", folderUrl, TraceHelper.AMSApplication.AMSService);
            }
            return true;
        }

		public static bool CreateAndAssociateSharePointDocumentLocation(OrganizationService coreCrmService, Guid incidentId, string caseNumber, string sharePointDocumentUrl)
        {
            SharePointDocumentLocation sharePointDocumentLocation = new SharePointDocumentLocation();
            sharePointDocumentLocation.Name = "SharePoint Document Location for " + caseNumber;
            sharePointDocumentLocation.Description = "SharePoint Document Location created for storing documents related to case";
            sharePointDocumentLocation.AbsoluteURL = sharePointDocumentUrl;
            sharePointDocumentLocation.RegardingObjectId = new EntityReference("incident", incidentId);
			coreCrmService.Create(sharePointDocumentLocation);
            return true;
        }

Please refer these wonderful posts that were extremely helpful.

http://charlesemes.blogspot.com/2011/02/create-sharepoint-document-locations-in.html

http://geek.hubkey.com/2007/10/upload-file-to-sharepoint-document.html

Ribbon Editor for CRM 2011


Hi,

I was just reading some of the blogs that i have subscribed to in my rss reader and came to know that ribbon editor tool for CRM 2011 has been released.

http://mscrmtools.blogspot.com/2011/07/new-tool-alpha-ribbon-editor.html

 

http://erikpool.blogspot.com/2011/10/new-crm-2011-ribbon-editing-tool.html

 

I think ribbon customization is one of the most complex task in CRM 2011.  Thanks you guys for helping us by building the tool.

Bye..