Value types (primitive type) ( simple type) are variable that contain their data directly.
They don’t contain reference to data stored elsewhere in memory.
Instances of values types are stored in an area of memory called stack where it is easy for the runtime to perform CRUD operation with minimal overhead.
Now what exactly is STACK based memory-
It is regions of memory where data is added or removed in a Last-In-First-Out manner.
each thread has a reserved region of memory referred to as its stack.
When a function executes, it may add some of its state data to the top of the stack; when the function exits it is responsible for removing that data from the stack. If a region of memory lies on the thread’s stack, that memory is said to have been allocated on the stack.
Thus stack allocation is very simple and typically faster.
Another advantage is that memory on the stack is automatically reclaimed when the function exits, which can be convenient for the programmer.
A disadvantage of stack based memory allocation is that a thread’s stack size can be as small as a few dozen kilobytes. Allocating more memory on the stack than is available can result in a crash .
Another disadvantage is that the memory stored on the stack is automatically deallocated when the function that created it returns, and thus the function must copy the data if they should be available to other parts of the program after it returns.
The are around 300 value types in .NET Framework. Most frequently used one are
System.SByte, Byte,Int16,Int32,UInt32,Inte64,Single,Double,decmal,char, boolean, datetime
Follow the following steps for creating subscriptions
1. Log into the reporting server: http://crmServer/reports
2. Click on _MSCRM Subscriptions Folder
3. Click on the report for which the subscription needs to be created
4. Click on the Subscriptions Tab
5. Click on New Subscription
6. Under Report Delivery Options, choose ‘Report Server File Share’
7. Provide details for the File Name as mentioned below
8. Provide the path of the folder where you want to save this subscription. This folder should be in the root directory of the reporting server. The person who is creating the subscription should have Read/Write Access to this folder.
For Ex: In the development server, a folder called ‘SubscribedReports’ has been created in the C drive. If a person called DomainName\XYZ’ is creating the subscription, then DomainName\XYZ’ should have write access to the ‘Subscribed Reports’ folder. The path to be provided in the reporting server subscription page would be ‘\\.’
9. Choose the render format : PDF format
10. Provide the Username/Password.
11. Under Subscription Processing Options, click on the button ‘Select Schedule’
12. Choose the scheduling date and time and then click on OK – Scheduling Every Monday at 10.00AM for all the reports
13. Under Report Parameter Values, choose the parameters that would be applicable for the specified subscription.
14. When all of the above have been completed, click on OK.
To find the opportunity record shared with a particular user in Microsoft Dynamics Crm
select o.name as OpportunityName,p.AccessRightsMask from opportunityBase o
left join PrincipalObjectAccess
p on p.objectid=o.opportunityid left join systemuser u
on p.principalid=u.systemuserid where u.fullname=’nishant r’
AccessRightsMask values and what they mean
AppendAccess 4 – Specifies the right to append the specified object to another object.
AppendToAccess 8 – Specifies the right to append another object to the specified object.
AssignAccess 0x80 -Specifies the right to assign the specified object to another security principal.
CreateAccess 0x10 -Specifies the right to create an instance of the object type.
DeleteAccess 0x20 -Specifies the right to delete the specified object.
ReadAccess 1 -Specifies the right to read the specified type of object.
ShareAccess 0x40 -Specifies the right to share the specified object.
WriteAccess 2 – Specifies the right to update (write to) the specified object.
3– Read + Write
65539– Read + Write + Delete
851991– All the rights
262145– Share+Read etc…
फिर मिलते हें
Hi today we will see how to create wizard like window application in .NET 2.0.
1) Create a new window application.
2) Add three forms in it. I have named the form as FirstStep, SecondStep and ThirdStep.
3) In FirstStep add two button – Next and Cancel
4) In SecondStep add three button- Previous, Next and Cancel
5) In ThirdStep add two button- Previous and Cancel
6) Than add a new class file – name it WizardData.cs
7) Add following code to it
// this wizardData class will have a enumeration and a property to display the appropriate form
public class WizardData
public enum wizardForms
FirstStep =1, SecondStep=2, ThirdStep=3,Cancel =99
private wizardForms formToShow;
public wizardForms FormToShow
8. Then go to program.cs and modify it in the following manner
static void Main()
//Replace Application.Run(…. ) with MyInitialization() – custom function
9) The code for MyInitialization() goes like this
// Create instances of all the forms to be displayed
private static void MyInitialization()
WizardData wData = new WizardData();
wData.FormToShow = WizardData.wizardForms.FirstStep;
Form step1 = new FirstStep(wData);
Form step2 = new SecondStep(wData);
Form step3 = new ThirdStep(wData);while (wData.FormToShow != WizardData.wizardForms.Cancel)
}10) Now go to your FirstStep Form. Replace the constructor with this
public FirstStep(WizardData wd)
this.wData = wd;
11) In the cancel button and next button click event handler write the following code
private void btnNext_Click(object sender, EventArgs e)
// to show the SecondStep form
wData.FormToShow = WizardData.wizardForms.SecondStep;
}private void btnCancel_Click(object sender, EventArgs e)
wData.FormToShow = WizardData.wizardForms.Cancel;
12) Repeat the same step 11 for SecondStep and ThirdStep form.
for previous button click event handler add the following codeprivate void btnPrevious_Click(object sender, EventArgs e)
// replace the wizardForm.(…) with appropriate form to be displayed
wData.FormToShow = WizardData.wizardForms.FirstStep;
To do this,
1) Add a new item global.asax in your website.
2) Put the following code in it
void Application_Start(object sender, EventArgs e)
// Code that runs on application startup
Application[“UsersOnline”] = 0;
void Session_Start(object sender, EventArgs e)
// Code that runs when a new session is started
Application[“UsersOnline”] = (int)Application[“UsersOnline”] + 1;
void Session_End(object sender, EventArgs e)
// Code that runs when a session ends.
// Note: The Session_End event is raised only when the sessionstate mode
// is set to InProc in the Web.config file. If session mode is set to StateServer
// or SQLServer, the event is not raised.
Application[“UsersOnline”] = (int)Application[“UsersOnline”] – 1;
3) In the webpage where the no of online users have to be displayed make use of this application object
protected void Page_Load(object sender, EventArgs e)
Response.Write(“The no of users online are ” + Application[“UsersOnline”].ToString());
These are the steps i followed
1) Created a new windows application.
2) Added reference to System.DirectoryServices dll
3) Added a textbox(where the email id will be entered) and a button in the form.
4) On btnClick this is the code i wrote
we use the DirectorySearcher class to query the directory and read the attributes of the objects found
DirectorySearcher Dsearch = new DirectorySearcher();
EmailID = txtEmailID.Text;
The filter in an LDAP query restricts the objects that the search will return. It is the equivalent of the WHERE clause
Dsearch.Filter = “(&(objectCategory=person)(sAMAccountName=*)(mail=”+EmailID+”))”;
objectCategory=This attribute is meant to be used to group common types of objects together so that we can search across all of them. Both user and contact classes share the same objectCategory value of person.
sAMAccountName =To separate users from contacts efficiently we can make user of sAMAccountName attribute
mail =Finally the mail attribute is the attribute which we looking for. Setting it to the value entered in the textbox by the user
SearchResult sResult = Dsearch.FindOne();
A SearchResult represents a single item from a result set.The FindOne method returns a single SearchResult, representing the first result in the underlying result set. Internally, this method is calling the FindAll method and returning the first SearchResult from the SearchResultCollection
if (sResult != null)
txtInfo.Content = “This email id already existing”;
txtInfo.Content = “This email id is not found”;